Innovative Construction of Combined Ground and Elevated level Service Reservoirs in Single Structure
This paper presents a combined RCC Ground level Service Reservoir and Elevated Level Service Reservoirs for a capacity of 1 million liters and 1.25 million liters respectively store fully treated potable water close to the point of distribution. The best way is to select this type of combined structures depending on the circumstances and site. The aim of this paper design large capacity of combined RCC water tanks in a single structure. The idea is to reach a definite conclusion regarding the superiority of the two techniques over one another for specified capacity. This research gives in brief about Service reservoirs, Service reservoirs requirement as per IS provisions and particular for ground and elevated level reservoirs by carried out the analysis and studying different types of water towers in to get the idea of Service reservoirs with help of STAAD Pro software. The main concept of designing combined service reservoirs in one structure is to increase storage capacity and improve pressure without affecting environmental and ecological assets in the area. In addition, to get the right water pressures to both nearby and more distant residents. In this paper carried out the conclusion is designing a single tower with two separate reservoirs different pressure zones had the operational costs were 20 percent lower, which offset higher capital costs.