Investigation on the Use of Sosrobahu Technology as Road Construction Technique

Abstract

In order to minimize traffic disturbance during the construction of flyover, the 450 tones pier head is turned 90 degrees. A device is used in Metro Manila Skyway Project in the Philippines. The Sosrobahu device is a hydraulic non friction rotating device; it is a flat jack with a diameter of 80 cm and place in the center of pier. The pier head is then cast over the pier parallel to road axis, oil is injected into the device until the force produced but the oil pressure nearly equals the weight of the pier head, then the pier head is turned 90 degrees. Oil pressure is then released and the gap injected with non-shrink grout. Four post-tensioned U cables of total ultimate capacity of 600 tones are then turned through the pier head and pier, post-tensioned and grouted.