Springback Analysis For Land Width Optimization In Cold Drawing Process Of Square Sectional Seamless Tubes

  • Dr. D.B. Karanjule, Dr. S. S. Bhamare

Abstract

Seamless tubes manufacturing process by cold drawing process achieves outer diameter, inner diameter
and thickness of the tubes as per requirement. This paper emphasizes on the problem of springback effect
on square cross sectional seamless steel tubes faced in the production with different land widths. The
experimental study is carried for the analysis and modification on land width or bearing length of the die
in controlling the springback of square sectional seamless steel tubes. This study deals with the effect of
land widths of 5, 10, 15 and 20 mm on springback by conducting experimentation and finite element
analysis using ANSYS. The results of this study reveals that 10 mm is optimum land width to minimize
springback in square sectional tubes. This research improved springback results with the aid of series of
experimentation. The results of this study reduced the rejection of precision tubes by 3 % saving substantial
and considerable amount of the cold drawing manufacturing industry.

Published
2020-04-13
How to Cite
Dr. D.B. Karanjule, Dr. S. S. Bhamare. (2020). Springback Analysis For Land Width Optimization In Cold Drawing Process Of Square Sectional Seamless Tubes. International Journal of Advanced Science and Technology, 29(7s), 2406-2417. Retrieved from http://sersc.org/journals/index.php/IJAST/article/view/12702